How to Replace Pull Cord on a Chainsaw Easily in 2024?

Replace Pull Cord on Chainsaw

Are you one of those people that consider themselves handy? Do you love taking your DIY projects to a whole new level? Then I have just the thing for you: replacing the pull cord on your chainsaw! Yes, it sounds intimidating and difficult but with our step-by-step guide, you’ll be able to do it quickly and easily in no time at all. So let’s get started – grab your toolbox and we’ll show you how to replace the pull cord on a chainsaw in 2024.

How to Replace Pull Cord on a Chainsaw Easily ?

How to Replace Pull Cord on a Chainsaw Easily in 2024?

To replace a pull cord on a chainsaw, you will first need to remove the starter cover and then locate the pulley wheel at the bottom of the saw. Next, attach one end of the new pull cord to where the old one was connected and thread it through the same pathway as before.

When pulling out any excess slack in the cord, make sure it is tightly wrapped around the pulley wheel and then secure the other end in place. Finally, replace the starter cover and wrap the starting handle until you feel resistance to indicate that everything has been threaded correctly.

Here is the Step by Step Guide:

Step 1

Before you begin, it is important that you make sure the chainsaw and its chain are not engaged. This will help ensure your safety throughout the process.

Step 2

After checking to ensure the chain and chainsaw are off, it is time to open up the saw. To do this, you will need to locate the two screws that hold the top cover in place. After unscrewing them, you will be able to remove the cover easily.

See also  How to Troubleshoot a Chainsaw with Weak Spark

Step 3

Once you have removed the cover, locate the pull cord which should be attached at one end of the chainsaw engine. This is usually easy to identify as it is the thickest cord in the engine.

Step 4

Now that you have located the pull cord, detach it from its place and remove it entirely from the chainsaw. Take careful note of how this pull cord is connected to ensure that you can reconnect it correctly after you’ve replaced the new one.

Step 5

Now you can replace the old pull cord with a new one. Attach the new cord to where it was originally connected and thread it through the same pathway as the old one before securing it into place.

Step 6

Once you have secured the new pull cord in its place, start to wrap it around the pulley wheel at the bottom of the saw.

Step 7

Keep wrapping it around the wheel until all slack is taken out of the pull cord. After this, you can secure one end of the pull cord to its initial place, making sure that it is firmly attached and will not unravel.

Step 8

The next step requires you to replace the saw’s cover and ensure that it is firmly attached.

Step 9

Finally, wrap the starting handle in a clockwise direction until you feel resistance. This will indicate that the pull cord has been threaded correctly into place.

Step 10

Once everything is in its proper place, your chainsaw should be ready to go!

Selecting a pull cord for your chainsaw

When selecting the pull cord for your chainsaw, it is important that you purchase one that is strong and durable. This will ensure longevity and a smoother operation. The size of the pull cord should also be taken into account, as too thick or too thin can cause problems in the long run. Lastly, make sure to purchase your pull cord from a reputable supplier that offers a warranty against defects.

See also  How to Test a Chainsaw Coil? - Using & Without a Multimeter

Why is it Important to Replace the Pull Cord on a Chainsaw?

Here are the primary reasons why it is important to perform regular maintenance on the pull cord of a chainsaw:

  1. To ensure that your chainsaw is running smoothly, it is imperative to check and replace the pull cord regularly. This will help avoid any major issues down the line – such as the chain becoming stuck or jammed – that can cause serious accidents.
  2. A worn-out pull cord can cause the chainsaw to become unresponsive, making it difficult to start or even stop it. This can be highly dangerous and should be avoided at all costs.
  3. Replacing the pull cord regularly will also help you save money in repair and maintenance costs as it will ensure a smoother operation.
  4. A well-maintained pull cord will also keep your chainsaw running at its optimal performance level, meaning you can get more out of it for longer.
  5. Lastly, a correctly maintained pull cord will help to reduce the overall noise generated by the saw itself, ensuring a quieter operation and less disruption for those around you.

Things you will need to replace the pull cord

Here are the essential pieces of equipment that you will need to replace the pull cord on your chainsaw:

  • A Phillips screwdriver or similar tool for unscrewing screws.
  • A replacement pull cord – make sure it is the correct size and fits your model of saw.
  • Needle-nose pliers or similar tools for grabbing small pieces.
  • An adjustable wrench or similar tool for tightening screws and other small parts.
  • A pair of safety gloves – these will help protect your hands from any sharp edges or splinters while you are working.

FAQs

How often should I replace my chainsaw’s pull cord?

It is recommended that you check and replace the pull cord on your chainsaw at least once a year. This will help ensure optimal performance and reduce the chances of any major issues occurring down the line.

See also  Chainsaw Accidents: A Guide to Prevention and Safety

What size pull cord should I use for my chainsaw?

When selecting a replacement pull cord for your chainsaw, make sure that you purchase one which is the same size as the old one. Using a cord that is either too thick or too thin can cause serious issues, so it is important to get the right size. Also, make sure to buy your pull cord from a reputable supplier that offers a warranty against defects.

How do you install a pull cord?

Installing a pull cord on a chainsaw is relatively straightforward. First, locate the pulley wheel at the bottom of the saw and attach one end of the new cord to where the old one was connected. Then thread it through the same pathway as before, wrapping it tightly around the pulley wheel and securing the other end in place.

How do you replace a pull cord on a Stihl saw?

The steps for replacing a pull cord on a Stihl saw are the same as those for any other model of chainsaw. Firstly, you will need to remove the starter cover and locate the pulley wheel at the bottom of the saw. Then attach one end of the new pull cord to where the old one was connected, threading it through the same pathway as before. When pulling out any excess slack in the cord, make sure it is tightly wrapped around the pulley wheel and then secure the other end in place. Finally, replace the starter cover and wrap the starting handle until you feel resistance to indicate that everything has been threaded correctly.

How do you fix a chainsaw pull cord spring?

If you’re having trouble with your chainsaw pull cord spring, it might be due to it being worn or damaged. In this case, the best option is to replace the spring altogether. You can do this by firstly unscrewing the screws that hold the starter housing in place and then removing it from the saw.

 

Similar Posts