How to Split Firewood With a Chainsaw? – In 4 Steps

How to Split Firewood With a Chainsaw

Whether many logs pile up in your backyard or a single, large log needs splitting, it’s really no fun carrying all that heavy wood back and forth from the chainsaw station. You may be tempted to just leave it all as one big piece of lumpy kindling.  However, with the help of a chainsaw, you can quickly and easily break down both small and large logs into usable pieces such as firewoods.

Splitting firewood doesn’t just make it easier to transport; doing it yourself can help save on energy bills and reduce energy waste too. For example, you can turn it into a wood stove for outdoor usage or to lit up your fireplace. With four simple steps, anyone can learn this skill quickly and easily – so let’s begin your journey towards becoming an expert wood splitter today!

Things Needed To Split The Firewood

How to Split Firewood With a Chainsaw

Chainsaw is a great tool to split logs into smaller pieces. Before starting, you need to prepare several things needed to split the firewood with a chainsaw. They are a firewood chainsaw, a sawhorse or a support tool, and safety gear.

Here is the explanation of why you will need these things.

1. Firewood Chainsaw

firewood chainsaw is designed specifically to split logs. It has a larger blade and a more powerful engine than the usual chainsaws. The size of the blade affects how easy it is to cut through thick pieces of wood, while more power allows for a faster process.

See also  How to Troubleshoot a Chainsaw with Weak Compression: A Guide

2. A Sawhorse Or A Support Tool

You will need something to support the logs so that you can easily access them from different angles when cutting with the chainsaw. You can use either a sawhorse or other tools, such as an axe stump or a log splitter, if you have one available.

3. Safety Gear

It’s important to wear all necessary safety gear when using a chainsaw, including gloves, goggles, ear protection, and a hard hat. It’s also important to make sure the area is free of any potential hazards, such as electric wire, branches, or stones that could get in the way when you do the firewood cutting.

Now that you have all the necessary items, you are ready to start splitting firewood with a chainsaw! Read on for step-by-step instructions on how to do it. Good luck, and stay safe!

How to Split Firewood With a Chainsaw? – 4 Step Process

These are the steps to split your firewood with a chainsaw:

  1. Prepare For The Task
  2. Choose The Log
  3. Cutting Firewood Into Logs With Chainsaw
  4. Finally, Cut The Wood Into Sections Of Approx 30 CM

Let’s see each of these steps in depth.

Step 1: Prepare For The Task

First and foremost, you need to prepare the area for splitting. Make sure the logs and other objects are securely placed on a support tool, such as a sawhorse or an axe stump. Put on your safety gear and get ready.

Step 2: Choose The Log

Choose a log that is of appropriate size and thickness for your saw blade. If it is too thick, you will have difficulty in cutting it with a chainsaw.

See also  How to Replace the Carburetor in a Chainsaw?

Step 3: Cutting Firewood Into Logs With Chainsaw

Once you have chosen the log, turn on the chainsaw and make one cut from top to bottom in order to divide the log into two sections. Continue this process till all your logs are divided into smaller pieces of firewood.

Step 4: Cut The Wood Into Sections Of Approx 30 CM

The final step is to cut each of the wood logs into sections roughly 30 cm long. Here are some steps to follow so you can have firewood with precise measurements:

  • Place the log onto the support tool.
  • Position the chainsaw blade at an angle of around 20 degrees and make a cut deep enough to reach one-third of the way through the log.
  • Move the saw over by 10 cm and repeat.
  • Continue this process until you have reached your desired length.
  • And there you have it!

Now you know how to split firewood with a chainsaw into 4 easy steps. With correct preparation and safety precautions, splitting firewood can be an enjoyable activity for any DIY enthusiast or gardeners.

Tips For Cutting Firewood With A Chainsaw

Of course, there are some tips to ensure your work runs smoothly, as follows:

  • Make sure the chainsaw chain is sharp and tensioned properly for optimum performance.
  • Cut slowly to avoid overworking your saw’s engine and to reduce kickbacks.
  • Be aware of potential hazards such as stray branches, rocks, or electric wires at all times.
  • Keep a fire extinguisher on hand in case of an emergency.
  • After finishing the project, keep the firewood in a dry place. You do not want wet firewood when you need it.

These are just some tips to get you started, but with enough practice, you can be a pro in no time!

Also Read: How Long Does a Chainsaw Chain Last?

FAQ

Can you split a firewood with a chainsaw?

Yes, you can! With the help of a sharp chainsaw and the correct safety gear, you can easily split firewood into smaller logs.

See also  Are Husqvarna Chainsaws any good? Finding the Answer in 2024

How do you split a log with a chainsaw?

You will need to mark where you want to cut on the log before starting. Then, start your saw and make one cut from top to bottom in order to divide the log into two sections. Finally, continue this process till all your logs are divided into smaller sections of firewood.

What can chainsaws not cut through?

Chainsaws cannot cut through metal objects or hard surfaces such as concrete. They should also not be used on any wet or frozen wood as they may cause kickbacks.

How long should wood dry before splitting?

The ideal timeframe to let your wood dry before splitting is 6-12 months, depending on the type of tree the wood came from. A dry wood is easier to work with. This will ensure that the firewood splits easily and cleanly with a chainsaw.

Is there a trick to splitting wood with chainsaw?

Yes, there is! The most important thing is to keep your chain sharp and tensioned properly for optimal performance. Also, make sure to be aware of potential hazards such as stray branches, rocks or electric wires at all times and never move too quickly when cutting.

Wrapping Up!

To wrap up, we have gone through the 4 steps on how to split firewood with a chainsaw. We also discussed some tips and FAQs that you need to consider when cutting your firewood with a chainsaw.

It is important to always practice safety precautions at all times and follow the instructions carefully for the successful splitting of firewood! So what are you waiting for? Get yourself a chainsaw and start slicing up some wood! Good luck!

Similar Posts