How To Put a Chain Back On Chainsaw? A Detailed Guide

How To Put a Chain Back On Chainsaw? A Detailed Guide

Are you in the middle of a chainsawing job and stopped abruptly with a rattling noise? Did your chain come off its track again? Don’t worry, it happens to everyone! We’ve all been there. But thankfully, once you understand how it works, it’s easy to put that chain back on – and even simpler to avoid this issue popping up next time round by ensuring your saw remains at peak efficiency. With this blog post, we’ll be taking an amusing yet full technical dive into the world of maintaining chainsaws with the aim of sending you quickly on your merry way, cutting down trees or branches like nobody’s business!

How to Put a Chain Back on Chainsaw?

how to put a chain on a chainsaw

First, make sure you’re using the correct type of chain for your saw model. Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack. Use a link locking tool to insert the pins into each side of the chain link. Finally, use a chain break tool to secure the chain in place and make sure it’s properly seated. 

Why is it important to replace the chain of chain saw ?

Replacing the chain of your chainsaw is essential to ensure it remains in peak condition and working safely. Here are  some of the benefits:

  1. To prevent chainsaw kickback, which is when the chainsaw “kicks back” and can cause serious injury;
  2. To ensure your chainsaw cuts properly by providing a sharp cutting surface;
  3. To maintain the longevity of your chainsaw by replacing worn links or broken chains thus avoiding costly repairs;
  4. To decrease the risk of accidents, as a sharp and properly tensioned chain will reduce potential kickback.
  5. To ensure a proper cutting efficiency.
See also  How to Assemble a Mini Chainsaw in 7 Easy Steps?

Things Required

Before you begin, make sure that your chainsaw is properly lubricated and in good working condition. You will also need a few tools to complete the job:

  1. Chainsaw chain;
  2. Reciprocating saw for cutting the chain link;
  3. Chain gauge for checking the size of the cutter; 
  4. Screwdriver for adjusting the tension;
  5. Chainsaw guide bar; and
  6. An air compressor (optional).

How to Put a Chain Back on an Electric Chainsaw?

Once you have all these tools in place, it’s time to start putting the chain back onto your chainsaw. Here are some simple steps to follow:

  1. Remove the chain from the package and check if it’s compatible with your chainsaw.
  2. Place the chain link into its corresponding slot on the guide bar.
  3. Make sure that all cutters are properly aligned to ensure a smooth cutting surface.
  4. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack.
  5. Use the chain gauge to check the size of each cutter and adjust as necessary.
  6. Once everything is adjusted correctly, your chainsaw should be ready for use!

And that’s it – you’ve successfully put a chain back on an electric chainsaw!

How to Put a Chain Back on Husqvarna Chainsaw?

Putting a chain back on a Husqvarna chainsaw is similar to the steps above, but there are some slight differences.

  1. First, make sure you’re using the correct type of chain for your saw model. Check the manual or contact customer service if unsure.
  2. Place the chain link into its corresponding slot on the guide bar.
  3. Ensure all cutters are properly aligned to ensure a smooth cutting surface.
  4. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack.
  5. Use the chain gauge to check the size of each cutter, and adjust as necessary.
  6. Once everything is adjusted correctly, your chainsaw should be ready for use!

How to Put a Chain Back on Stihl Chainsaw?

The process of putting a chain back on a Stihl chainsaw is similar to the steps outlined above, with some slight differences.

  • First, make sure you’re using the correct type of chain for your saw model. Check the manual or contact customer service if unsure.
  • Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned to ensure a smooth cutting surface.
  • Securely tighten screws to adjust the tension of the chain, ensuring there is no slack. Use the chain gauge to check the size of each cutter and adjust as necessary. Once everything is adjusted correctly, your chainsaw should be ready for use!
See also  What are Best Practices for Chainsaw Storage for Off-Seasons?

How to put a Chain Back on a Ryobi Chainsaw?

  1. First, make sure you’re using the correct type of chain for your saw model. Check the manual or contact customer service if unsure.
  2. Place the chain link into its corresponding slot on the guide bar.
  3. Ensure all cutters are properly aligned to ensure a smooth cutting surface.
  4. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack.
  5. Use the chain gauge to check the size of each cutter and adjust as necessary.
  6. Once everything is adjusted correctly, use the air compressor to blow away any debris and increase cutting efficiency.
  7. Finally, add lubricant to the guide bar and chain for maximum cutting efficiency.

And that’s it – you’ve successfully put a chain back on a Ryobi chainsaw!

How to put a Chain Back on Homelite Chainsaw?

  • Make sure you’re using the correct type of chain for your saw model. Check the manual or contact customer service if unsure.
  • Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned to ensure a smooth cutting surface.
  • Securely tighten screws to adjust the tension of the chain, ensuring there is no slack. Use the chain gauge to check the size of each cutter and adjust as necessary.
  • Add lubricant to the guide bar and chain for maximum cutting efficiency.

How to Put a Chain Back on Craftsman Chainsaw?

  1. First, make sure you’re using the correct type of chain for your saw model. Check the manual or contact customer service if unsure.
  2. Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned to ensure a smooth cutting surface.
  3. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack.
  4. Use the chain gauge to check the size of each cutter and adjust as necessary.
  5. Add lubricant to the guide bar and chain for maximum cutting efficiency.
  6. Finally, use a chain break tool to secure the chain in place and make sure it’s properly seated.
See also  How Much Does It Cost to Rent a Chainsaw from Home Depot?

Winding Up!

That’s all there is to it – you’ve successfully put a chain back on your chainsaw! Following these steps will help ensure that your chainsaw is in peak condition and ready to tackle any project. Remember to always wear safety gear while working with a chainsaw, and be sure to properly lubricate and maintain the tool for optimal performance.

FAQs

What is the proper way to put on a chainsaw chain?

The proper way to put on a chainsaw chain is to make sure you’re using the correct type of chain for your saw model. Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned. Tighten screws to adjust the tension of the chain, ensuring there is no slack. Finally, use a chain break tool to secure the chain in place and make sure it’s properly seated.

How do you install a chainsaw chain and bar?

To install a chainsaw chain and bar, first, ensure you’re using the correct chain type for your saw model. Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack.

Can you put any chainsaw chain on a chainsaw?

No, you cannot put any chainsaw chain on a chainsaw. It is important to ensure that you are using the correct type of chain for your saw model. Always consult the manual or contact customer service if unsure.

How do you put a chain on an electric chainsaw?

To put a chain on an electric chainsaw, first, make sure you’re using the correct type of chain for your saw model. Place the chain link into its corresponding slot on the guide bar and make sure all cutters are properly aligned. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack. Finally, use a chain break tool to secure the chain in place and make sure it’s properly seated.

How do you install a pin chain?

To install a pin chain, make sure you’re using the correct type of chain for your saw model. Securely tighten screws to adjust the tension of the chain, ensuring there is no slack. Use a link-locking tool to insert the pins into each side of the chain link. Finally, use a chain break tool to secure the chain in place and make sure it’s properly seated. 

Similar Posts