How To Oil Mini Chainsaw?

How To Oil Mini Chainsaw?

You may have used a chainsaw before if you are a professional woodworker or a homeowner. Cutting firewood and pruning branches are two small tasks around the house that can be accomplished with a compact chainsaw. It is a practical tool to have around the house for quick jobs like pruning branches and cutting firewood ‌. Keep your tiny chainsaw well-oiled to ensure smooth operation and prevent overheating. This blog post will walk you through the simple procedures of lubricating a small chainsaw.

You decided to get a little chainsaw so that you could trim limbs and trees without becoming overly exhausted. However, how do you oil a small chainsaw? To maintain smooth operation and avoid overheating, keep your tiny chainsaw well-oiled.  Using a bar and chain lubricant will probably prevent severe wear, in my experience. It results in potentially hazardous machine conditions. 

How Should I Oil My Small Chainsaw? Complete Guide

how to oil mini chainsaw

Make sure you have the following things before you begin. They will assist you as you lubricate your small chainsaw.

  • A small blade
  • Fuel can
  • Rag

By following the straightforward methods below, you may simply oil a tiny chainsaw. 

  •  The little chainsaw should first be placed on a level surface. If one is not accessible, you can put up a workbench on a suitable table or a flat piece of ground. 
  •  Make sure the area is immaculate to avoid having anything get caught in the chain. In step two, remove the saw’s rear oil reservoir cap. If your model has one, open the grease caps for the bars and chains; otherwise, close them both.
  •  Up to the brim with oil, fill the tanks. If the motor in your model is a two-cycle engine, use a gas-to-oil ratio of 50:1. Check your owner’s manual for detailed instructions on the proper type and grade of oil if you’re unsure.
  •  Reservoirs should be shut off, and the lids should be fastened firmly.
  •  To get rid of any leftover oil, use a cloth.
  •  Give your tiny chainsaw some time to spread the oil evenly throughout the bar and chain after starting it. Be sure to keep a firm hold on it with one hand while using the throttle with the other.
  • It’s critical to keep in mind to empty the oil reservoirs after utilizing your chainsaw if you plan to do so for a considerable amount of time. It will prevent any harm that slow, old oil might cause.

    Are Mini Chainsaws Oiled?

Of course, much like regular chainsaws, small chainsaws require oil and lubrication. Although electronic chainsaws do not use an oil-and-gasoline mixture to operate, gas-powered chainsaws do. However, the lubrication of the bar and chain on electrical chainsaws need oil.

See also  How Does Chain Brake Work On A Chainsaw?

because tiny chainsaws often have smaller bars and chains than full-size saws. There is hardly much oil required. Another wise choice is to buy premium chain lubricant designed especially for chainsaws. If you use your saw and any of this oil spills. Due to the fact that it is normally biodegradable, it won’t harm the environment.

How Frequently Should You Oil A Mini Chainsaw?

Chainsaws perform a variety of tasks, so oiling one is crucial. For their operation, chainsaws require frequent contact and abrasion. This can cause more serious injury to chainsaws.

As a result, if you own a chainsaw, you must keep it greased. The oil keeps the chainsaw chain in good condition on it. It protects against overheating and prevents corrosion. Similar to how the chain may travel smoothly, the bar lubrication generates a smooth surface.

Which Lubricant Type Is Appropriate For A Small Chainsaw?

It’s also important to consider the lubricant you choose. Most tiny chainsaw manufacturers recommend using a specific bar and chain oil, which is readily available at any hardware store. Compared to regular motor oil, this oil keeps the chain and bars cleaner longer. It may lengthen the life of your saw.

A high-quality bar lubricant will decrease friction in the chainsaw, boosting engine performance stihl gta and cutting effectiveness.

The Best Method For Choosing Chainsaw Oil

Knowing some properties of chainsaw bar oil can help you make an informed stihl gta decision when buying it.


How well alternative oil adheres to the chain is based on its tackiness. Additionally, it keeps you from slipping when using the chainsaw.


The film strength refers to the layer that chainsaw bar oil forms on the chain. In this method, the bar and chain links will be protected against corrosion. It will also stop the chainsaw blade and chain from easy step rusting and corroding.

Cutting Time

Chainsaw bar oil can shorten cutting time by reducing chain friction and battery pack improving engine performance. It will prevent tar, sap, and pitch safety features from building battery pack up on the chainsaw chain, further boosting performance.

See also  What Weight Is Chainsaw Bar Oil? A Guide


Choose a chainsaw bar oil that works with different gas powered chainsaw models. Another choice is a bar oil that is compatible with saws branch used for easy step different purposes, including pole or jaw saws.


Some chainsaw bar oils contain colors that have been added in. It makes it easy to determine when the chainsaw chain needs to be oiled and branch when it does not.


Most battery operated chainsaw bar oils have fair prices when compared to the quantity you get. Although some brands are less expensive than others, they still operate adequately.

What Type Of Oil Should Be Used In A Little Gas powered Chainsaw?

The oil you use is crucial as well. Most tiny chainsaw manufacturers advise using a particular bar and chain oil, which can be bought at any hardware shop. Compared to standard motor oil, this oil cordless chainsaw is made to remain on the chain and bar better, which can help your saw last longer.

The chainsaw’s friction will be reduced by using high-quality bar oil, which will also increase engine power and cutting efficiency.

Tips for Using a Cordless Chainsaw

Restrict your cutting to wood only

Never cut through plastic, brick, metal, or any other non-wood material with a tiny chainsaw. Never use a tiny chainsaw to cut a limb or tree whose diameter is more than the guide bar’s length. 

Correct Chain Tension

Make sure the guide bar has the chain appropriately tensioned. A slack chain could whip free or pull things into it. During heavy-duty operations, a tight chain may not move at all or run a higher danger of failing.

As a general guideline, pull the chain to see if the fitment is snug. When pulling the down chain firmly, allow no clearance but let the guide bar loosely bite the upper side of the down chain.

Prevent kickbacks

Kickback happens when the moving handheld chainsaw’s tip is permitted to contact something. The worker could be hurt if the tip returns with a violent bounce.

The small chainsaw’s guide bar needs to be 1-2 inches longer than the object’s diameter. Injury from kickback is less likely to occur when using chainsaws with a top flap or low kickback.

Frequently sharpen the chain

Although there is no hard and fast rule regarding how frequently you must sharpen your chainsaw, many experts advise doing so each time the equipment has to be refueled.

Observe the dress code

Wearing clothing that is too baggy or jewelry that hangs loosely while using a saw could get caught in the chain.

Even though stationary chainsaws have incredibly sharp chains, avoid touching them. The chain can seriously lacerate the skin even when it is still. When not in use, make sure the saw’s cover is on, and if possible, remove the battery to prevent the machine from starting at all.

See also  How to Handle Chainsaw Recalls and Manufacturing Defects

Keep the chain lubricated as soon as possible.

The oil lubricates the bar and chain to avoid early wear and potential chain derailing. 

Run the chainsaw for a few seconds after applying the oil to ensure that it is distributed evenly down the chain. Although manual oiling can be a little challenging to manage, there are auto oiling alternatives that apply a steady stream of oil to the chain in a consistent manner. To monitor the oil level and fill the tank as necessary, check the oil tank.

Final Word

A cheap but often extremely powerful piece of equipment is a tiny chainsaw. It’s important to keep in mind that for this garden tool to perform at its best, bar and chain oil is required. I’ve described how to oil a little chainsaw above.

One of the best ways to increase the chainsaw’s lifespan is to apply the right quantity of lube to the bar and chain. The chain will last longer and be able to cut the wood more efficiently. As you can see, oil is necessary for tiny chainsaws to operate effectively. Make sure you regularly check the oil level and top off the reservoir as necessary. Additionally, you want to spend money on a high-quality chain oil made especially for chainsaws. Always refer to your saw’s owner’s handbook for more details if you have any inquiries or worries.


Can you carefully oil a chainsaw?

Chainsaw upkeep is relatively easy. All that is required is a funnel and some chain grease. To make sure the engine is cool, look for the cap bearing the oil sign. Open it up with a funnel and fill it full of a premium MaxPower chain and bar lubricant.

Do chainsaws require lubrication in order to cut?

The quick travel of the chain over the chainsaw blade without oil could cause a lot of friction. The slow chain and excessive gasoline burning cause a lot of friction between your bar and chain. The increased heat could significantly damage your saw.

What kind of chainsaw oil is suggested?

Chainsaw bar oil traditionally has been made from petroleum. Lighter oil is utilized in the winter, and heavy oil in the summer.

Do tiny chainsaws with batteries require oil?

Oil is required for lubrication and protection of the chain and guide bar in electric chainsaws. The oil that has dropped on it shields from harm and overheating the guide bar. Electric chainsaws do not require oil as a fuel component, in contrast to gas-powered chainsaws, which require gasoline diluted with oil.

What happens to my chainsaw if I don’t put oil in it?

Without oil, the chain’s rapid passage over the chainsaw bar may result in significant friction. There is a lot of friction between your bar and chain due to a sluggish chain and excessive fuel burning. This heat buildup could seriously harm your saw.

How long does chainsaw oil last?

When two-stroke oil is not blended with petroleum, it can last for a few years. Once combined with petroleum, we do not suggest storing for longer than 3 to 4 months in an approved airtight container. 



Similar Posts