How to Measure Chainsaw Bar and Chain Easily in 2024?

How to Measure Chainsaw Bar and Chain Easily in 2024?

Are you ready to get your hands dirty and measure your chainsaw bar and chain like a pro? If so, then buckle up and get ready for the ride of your life!. In this blog post, we will explore all the questions by diving deeper into why measuring your chainsaw bar and chain is important as well as providing easily understood instructions on how to accurately measure them in 2024.

So put down the tape measurer because I promise, once finished reading this article; even beginners can confidently tackle any measurement tasks that involve their beloved saws.

How to Measure Chainsaw Bar?

how to measure chainsaw bar chain

Measuring the length and size of your chainsaw bar is important for optimal performance, but in 2024, it can be tricky. You can measure the length of your chainsaw bar by laying it flat on a level surface and measuring from one end to the other with a ruler or tape measure.

Here’s how to measure a chainsaw bar easily in 2024:

1. Measure the length of your chainsaw bar:

To measure true length and the size of your chainsaw bar, you will need a ruler or tape measure. Start by laying the bar flat on a level surface and measuring from the tip of one end to the tip of the other end. Make sure to record this measurement accurately as it will be used later in determining the gauge and pitch of your chain.

See also  Troubleshooting Common Chainsaw Problems: A Guide

2. Measure the gauge of your chainsaw bar:

To measure the gauge of your chainsaw bar, use a combination square to measure from the bottom of one drive link to the opposite point on the same drive link. The measurement should be taken from the inside edge of each cutting corner and recorded in inches or millimeters.

3. Measure the pitch of your chainsaw bar:

To measure the pitch of your chainsaw bar, you will need to count the number of drive links along its length. To do this, start at one end and count every other link until you reach the other end. This measurement should be recorded as a fraction such as 3/8 or .050.

4. Review your measurements:

Once you have taken all of the above measurements, review them to verify that they are accurate.

Now that you’ve taken the necessary measurements, you can start using your chainsaw with confidence! Not only will measuring the bar and chain help to ensure that it is correctly fitted for optimal performance, but also it will enable you to easily replace individual parts as needed.

How to Measure a Chainsaw Chain?

Measuring a chainsaw chain is slightly different from measuring the bar. To accurately measure a chainsaw chain, you will need to:

1. Measure the length of your chainsaw chain:

To measure the length of your chainsaw chain start by counting the number of drive links along its length. This measurement should be recorded as a fraction such as 3/8 or .050.

2. Measure the pitch of your chainsaw chain:

To measure chain pitch of your chainsaw chain you will need to determine the distance between three consecutive rivet links. To do this, take a ruler or tape measure and place it on one side of the chain so that it runs between the three rivet links. Measure the distance between them and record this measurement as a fraction such as 3/8 or .050.

3. Review your measurements:

Once you have taken all of the above measurements, review them to verify that they are accurate.

How to Measure Husqvarna Chainsaw Bar ?

If you have a Husqvarna chainsaw, measuring the bar is relatively straightforward. To measure the Husqvarna chainsaw bar:

  • Start by measuring the length of the chainsaw bar, using a ruler or tape measure. Lay the bar flat on a level surface and measure from the tip of one end to the tip of the other end.
  • Next, use a combination square to measure from the bottom of one drive link to the opposite point on the same drive link. The measurement should be taken from the inside edge of each cutting corner and recorded in inches or millimeters.
  • To measure the pitch of the chainsaw bar, count the number of drive links along its length. Start at one end and count every other link until you reach the other end. This measurement should be recorded as a fraction such as 3/8 or .050.
  • Finally, review your measurements to verify that they are accurate.
See also  Why Is My Chainsaw Smoking? - Causes & Fixes

How to Measure Stihl Chainsaw Bar 

If you have a Stihl chainsaw, measuring the bar is slightly different. To measure the Stihl chainsaw bar:

  • Start by measuring the length of your chainsaw bar, using a ruler or tape measure. Lay the bar flat on a level surface and measure from the tip of one end to the tip of the other end.
  • Next, use a combination square to measure from the bottom of one drive link to the opposite point on the same drive link. The measurement should be taken from the inside edge of each cutting corner and recorded in inches or millimeters.
  • To measure the pitch of your chainsaw bar count the number of drive links along its length. Start at one end and count every other link until you reach the other end. This measurement should be recorded as a fraction such as 3/8 or .050.

How to Measure Oregon Chainsaw Bar

If you have an Oregon chainsaw, measuring the bar is also slightly different. To measure the Oregon chainsaw bar:

  • Start by measuring the length of your chainsaw bar, using a ruler or tape measure. Lay the bar flat on a level surface and measure from the tip of one end to the tip of the other end.
  • Next, use a combination square to measure from the bottom of one drive link to the opposite point on the same drive link. The measurement should be taken from the inside edge of each cutting corner and recorded in inches or millimeters.
  • Finally, count the number of drive links along its length.
See also  Chainsaw Not Getting Gas: Troubleshooting and Solutions

Safety Measures

When measuring any chainsaw bar, always use the appropriate safety equipment such as goggles, gloves and protective clothing. Make sure to take all necessary precautions when handling sharp objects.

Once you have taken all of the above measurements, review them to verify that they are accurate.

Final Takeaway!

Measuring the bar and chain of your chainsaw is a relatively easy process, but you should take the proper safety measures to ensure that it is done correctly. By following these steps, you can easily measure your chainsaw bar and chain in 2024.

FAQs

Is the chain length the same as bar length?

No, the chain length is not the same as bar length. The chain length is determined by measuring each drive link along its length, while the bar length refers to the overall measurement of the chainsaw bar from one end to the other.

Can you put a 16-inch bar on a 14-inch chainsaw?

No, you cannot put a 16-inch bar on a 14-inch chainsaw. The size of the chainsaw bar must match the size of the chainsaw, so if your chainsaw is 14 inches, then you should use a 14-inch bar.

What type of tool do I need to measure my chainsaw?

You will need a combination square and a ruler or tape measure to measure your chainsaw bar and chain accurately. Always wear the appropriate safety equipment, such as goggles, gloves, and protective clothing, when handling sharp objects. Additionally, ensure all necessary precautions are taken to ensure the task is done.

What size chainsaw bar do I need?

The size of the chainsaw bar you need will depend on the size of your chainsaw. Refer to the manufacturer’s instructions for more information on what size bar is recommended for your specific model.

How do you read a chainsaw chain number?

Chain numbers are typically stamped on the drive links of your chainsaw chain and consist of a series of letters and/or numbers. This number will help you identify what type of chain it is, as well as its size and pitch. Refer to the manufacturer’s instructions for more information about how to interpret this number.

Similar Posts