Are you one of the many people out there in 2024 who bought a chainsaw and are now wondering how to change the chain? Don’t worry, you’re not alone. Changing a chainsaw chain can be daunting for even seasoned professionals, so it is understandable if this process has left you feeling confused!
If that sounds like you then take a deep breath and relax – because today we’ll share an easy-to-follow guide on how to change your chainsaw’s chain with minimal fuss in just 20 minutes – yes, it can be done!
How To Change A Chainsaw Chain?
To change a chainsaw chain, start with turning off the chainsaw and unplugging the spark plug boot from the spark plug. Then, use a wrench or screwdriver to remove the screws that hold the bar and chain in place. Next, use a bolt cutter or hacksaw to cut off your old chain before measuring the length of your new chain accurately.
After this, connect any links needed with the help of pliers and tap down plates with a punch or flat surface. Finally, reconnect the spark plug boot before testing your chainsaw in a safe area.
Here is the step-by-step guide.
1. Safety is key
Before beginning to change the chainsaw chain, make sure that you are wearing protective gear such as gloves and eye protection.
2. Turn off the chainsaw and wait for it to cool down
Unplug the spark plug boot from the spark plug and pull it away from the engine of your chainsaw. If necessary, use a wrench or screwdriver to loosen the screws that hold the bar and chain in place.
3. Take out the chainsaw bar from your chainsaw
Identify where the master link is located on your old chain; it should be near the middle of one of its sides. If you can’t find it, consult the manual for your chainsaw model.
4. Cut off the old chain
Now cut off old chain with a bolt cutter or hacksaw and discard it in an appropriate place. It’s best that you get rid of your old chain, as the sharp edges of the links can potentially be hazardous to handle.
5. Measure the length of the new chain
Make sure it’s long enough to fit around the bar completely.
6. Connect the first link
Connect the first link of the chain to one end of the bar, using a pair of pliers or your hands if necessary. Weave in and out each link as you make your way to the other end of the bar.
7. Connect the other link
Once you reach the other end, hold the bottom link in place and insert it into the top link hole. Push down on the plate and tap it with a punch or flat surface to close it properly.
8. Open up the master link with pliers and attach it to the chain
Make sure that there is no gap between two links and that the master link is securely in place.
9. Put the bar back
Now put the bar back on your chainsaw, making sure that all screws are tight. Place the spark plug boot back on its socket until it clicks back into place and reconnect the spark plug wire.
10. Start and test
Finally, start the chainsaw and test it in a safe area. If everything is working, you’re all set to get back to work on your project!
What are the things you require?
In order to change a chainsaw chain, you will need the following items:
– Protective gear such as gloves and eye protection.
– A wrench or screwdriver to loosen the screws that hold the bar and chain in place.
– A bolt cutter or hacksaw for cutting off your old chain.
– New chain that is the same size as your old chain and long enough to fit around the bar completely.
– Pliers for connecting and disconnecting links, as well as opening up the master link.
– A punch or flat surface for tapping down plates.
– Spark plug boot and spark plug wire for reconnection.
– A safe area in which to test the chainsaw after changing the chain.
Why is it important to change chainsaw chain ?
Changing the chain on your chainsaw is an essential part of its maintenance.
- It helps to ensure that your chainsaw is running at maximum efficiency.
- It will help to prevent the chain from becoming dull and cause it to break during use, which could be potentially dangerous.
- A sharp chain also reduces the amount of time needed for completing a job and can reduce fatigue from extended use.
- Replacing the chain regularly will also extend the life of other components such as the engine and bar, as well as increase safety by helping to prevent kickback and other unsafe activity.
Precautions You Need to Take for Changing Chainsaw Chain
While changing a chainsaw chain you must:
- Wear protective gear such as gloves and eye protection to protect yourself from the sharp edges of the chain links.
- Make sure to unplug the spark plug boot from the spark plug before attempting to remove any screws or bars.
- Cut off the old chain with a bolt cutter or hacksaw and discard it in an appropriate place to prevent any unnecessary accidents.
- Measure the length of the new chain accurately to ensure that it is long enough to fit around the bar completely before connecting any links.
- Always make sure that all screws are tight when replacing the bar back on your chainsaw.
Changing a chainsaw chain is essential to ensuring that it runs properly and safely. Following the steps listed above, you can easily change your own chainsaw chain at home in 2024. Remember to always wear protective gear, unplug the spark plug boot before removing any screws or bars, measure the length of your new chain accurately and make sure that all screws are tight before you start using it. With these precautions and tips, you should be able to easily change your chainsaw chain in no time!
How often should I change the chainsaw chain?
Depending on how frequently you are using your chainsaw, it is recommended to replace the chain after around 8-10 hours of use or every two years.
What type of protective gear do I need for changing a chainsaw chain?
It is important to wear gloves and eye protection when replacing a chainsaw chain as it can contain sharp edges that could cause injury if handled improperly.
What should I do with my old chainsaw chain?
The old chainsaw chain should be discarded in an appropriate place to prevent any unnecessary accidents. It should not be reused in any way.
What tools will I need for changing a chainsaw chain?
You will need protective gear, a wrench or screwdriver to loosen the screws, a bolt cutter or hacksaw for cutting off your old chain, new chain long enough to fit around the bar completely, pliers for connecting and disconnecting links, a punch or flat surface for tapping down plates, spark plug boot and spark plug wire for reconnection.
Michael Boyle is the founder and main author of Chainsaws Finder, boasting over 20 years of experience in the chainsaw industry. Hailing from Texas, Michael combines his extensive knowledge and hands-on expertise to provide reliable advice and top-notch service. His vision is to empower chainsaw users to tackle any project with confidence, making Chainsaws Finder a trusted resource in the field.