How Fast Does a Chainsaw Spin? Measuring RPM of the Tool

how fast does chainsaw spin

How many RPMs does a chainsaw run at, do you not know? Well, that relies on the operators’ decisions. Some owners favor using their chainsaws at faster speeds, while others favor using them at lower speeds.

 Pull the throttle trigger, rev the chainsaw to full speed, and note the tachometer reading to find out how many RPMs the chainsaw runs at. It will range from 10,000 to 14,000 RPMs depending on the type of chainsaw. Despite the saw blade wide range, before performing the test, check the top speed.

 Continuous monitoring of the chainsaw’s revolutions per minute is rear handle necessary. It will inform you of the various problems your chainsaw has experienced. So let’s look into it more and find out ‌how saw blade many RPMs a chainsaw runs now!

How Fast Does a Chainsaw Spin?

how fast does chainsaw spin

You have come to this page in order to learn how many RPMs a chainsaw uses. A chainsaw can typically operate rear handle between 10,000 to 14,000 RPMs, but this range might change based on the size and kind of the chainsaw engine‌.

Chainsaws with a single gas cylinder rotate between 3600 and 4000 RPM. However, many electric chainsaws spin at 2000–3000 RPMs. In addition, your needs will determine how quickly your wrong direction tool operates. So, by making a few modifications, you can change the speed.

However, keep in mind that the lower chainsaw chain RPMs can additionally pressure skip chain the chainsaw engine and increase fuel consumption by up to 25% before you make any adjustments.

For many gas-powered chainsaws, the typical speed ranges from 5000 to 8000 RPMs. In contrast, depending on the rotational power and voltage category (12v, 14v, etc.), the typical speed of an electric chainsaw ranges from 2700 to 4000 RPMs.

The suggested speed for many chainsaws is 6000 RPMs or higher, which is half of the redline RPM of chainsaw chain engines. For instance, when cutting the wood, the chain saw chain will run at 50% throttle opening at 8000 RPM and 40c gas displacement. While lowering noise and fuel guide bar usage, it ‌gives skip chain you sufficient power for chopping wood.

All of this depends on the operator’s preferences and chainsaw chain direction usage frequency. In order to familiarize yourself with the chainsaw’s general operation and other safety features, you should always review the user’s manual before purchasing a chainsaw chain direction.

See also  How to Hang a Chainsaw?

How Can You Calculate Your Chainsaw’s RPMs?

A tachometer can be used to quickly determine the chainsaw RPMs of your chainsaw. The actions chain gauge you must chain brake take are listed below:

  •  If your tool’s chainsaw air filter is dirty and prevents you from getting the necessary reading, clean it first. The engines suffer from air starvation as a result of the unclean chainsaw air filter. Before putting the chainsaw away, it would be best to replace chain spin the chainsaw air filter if it is dusty. You must first release the cylinder cover in order to debris access the chainsaw air filter, and then use a screwdriver to remove the filter from the housing.
  •  Please now remove and clean the spark arrestor. With the aid of needle-nose debris pliers, you may remove it from right beneath the muffler. A wire brush can be used to clean the spark arrestor. If it’s dirty, the airflow can be severely hampered, and you could malfunction.
  • After completing this, add fresh fuel to chain direction the gasoline tank. It might come as a surprise, but a chainsaw’s performance might vary depending on whether its chain tension gasoline rear tank is full or only halfway full. You must adjust the chain saw carburetor if the tachometer reading indicates that it needs to be. But chain direction wait until the tank is full before making any adjustments. 
  • Start the engine and chainsaw, then wait for your tool to warm up. Look below the cylinder cover for the spark plug, which should chain tension be there. Then, to get to the spark plug, follow rare handle  the spark plug wire.
  • Attach the spark plug wire to the tachometer’s alligator clip so that it is 2 to 3 inches away from the chainsaw spark plug. You must hold the digital tachometer 2 inches above the spark plug to use it. Remember  chain oil the digital tension tachometer is wire-free.
  • Note the reading, and the tachometer will show the speed (2500 to 3000 RPMs) if the carburetor is configured properly. The speed may vary based on the model you tension have been using.
  •  The gas chainsaw should then be operated at maximum speed by pulling the throttle trigger. Again, note the reading. Depending on the gas chainsaw type, the reading could range from 10000 RPMs to 14 RPMs.
  • The experts advise against operating the chainsaw blade at a speed greater than that at which it was intended to operate. The carburetor will then be adjusted such that the tachometer reading is acceptable for your chainsaw blade.

    How Do Chainsaws Operate?

Using its gears and motors, the chainsaw produces a circular motion. As you are connected to the rotating head, the chainsaw blades are spinning rapidly. The chainsaw has two main tooth types: the regular teeth, which are utilized for most applications, and the rakers or skip teeth, which offer more cutting force.

See also  Electric vs Gas Chainsaw: Factors to Consider Before Selecting

The chainsaw engine runs continuously as soon as you turn it on. Pulling the safety brake will shut off the chainsaw. Around the front handling grip area, there is a brake. The chainsaw may be started easily this manner, but it must also be well maintained.

As you cut through the wood, the chainsaw slows down. Friction brings the speed loss on and other cutting-related issues. For example, you encounter resistance when the chain of the chainsaw rubs against the wood.

How To Estimate Chainsaw Speed

Chainsaws are strong implements used to prune branches and fell trees. The speed at which the chain rotates matters in chainsaw operation. Chainsaw speed calculations are crucial for ensuring the tool is used safely and effectively.

Chain speed calculation formula:

Feet per second (fps) or meters per second (MPS) are used to express chain pace. The following equation can determine chain speed:

Chain Speed (fps) = (Engine Speed x Diameter of Drive Sprocket) ÷ (Bar Length x 3.1416)


  • RPM is the unit used to express engine speed.
  • Drive Sprocket Diameter is expressed in inches (in).
  • Inches (in) are used to measure bar length.
  • The mathematical constant is 3.1416. Pi

Average Chainsaw Speeds for Different Types

Chainsaws come in a variety of styles, each with special characteristics and a varied average speed. The most popular types of chainsaws and their typical speeds are listed below:

Gas-Powered Chainsaws

Gas-powered chainsaws are famous for their durability and strength. They are ideal for heavy-duty cutting applications because to their 8,000–10,000 RPM speed range.

Electric Chainsaws

Electric chainsaws are more environmentally friendly and quieter than gas-powered chainsaws. They are ideal for cutting activities that call for less effort due to their regular speed range of 3,000 to 6,000 RPM.

Cordless Chainsaws

Chainsaws that are cordless and powered by batteries frequently have lower power than chainsaws that are powered by gas or electricity. They are appropriate for light to medium cutting duties because of their normal average speed range of 5,000 RPM to 7,000 RPM.

Pole Chainsaws

Tree pruning and trimming and other difficult-to-reach places are designed for pole chainsaws. They are suited for mild cutting activities because of their normal speed range of 2,000 RPM to 4,000 RPM.

Potential Influences on Chainsaw Speed

There are several factors that might affect a chainsaw’s speed, including:

  • Chain Type: The type of chain you select might affect how quickly your chainsaw operates. Chains with larger teeth will cut more quickly than chains with smaller teeth.
  • Sharpness of the Chain: A sharp chain will cut more quickly than a dull chain. To maintain the best cutting speed, it’s critical to keep your chain crisp.
  • Engine Size: Your chainsaw’s engine size impacts both power and speed. Generally, larger engines move at higher speeds than smaller ones.
  • Cutting Conditions: Chainsaw speed can also be impacted by the sort of material you are cutting. Harder substances like hardwoods could cause your chainsaw’s speed to decrease.
See also  What are the Benefits of Using a Chainsaw with an Anti-Vibration System?

You may choose the best chainsaw for your purposes and get the best cutting results by knowing the average speed of various chainsaw types, contrasting gas and electric chainsaw speeds, and taking these aspects into consideration.

Final Words

The chainsaw is very strong equipment that is beneficial to both professionals and homeowners. To operate a chainsaw safely and effectively, you must be knowledgeable about it. You must be knowledgeable about your tool, and understanding how many RPMs a chainsaw runs is equally important.

Your chainsaw’s RPMs can be determined by pulling the throttle trigger, operating it at a high pace, and noting the tachometer reading. The RPM speed normally ranges from 10,000 to 14,000 RPMs depending on the type of chainsaw you have been using. Additionally, you can adjust your chainsaw’s RPMs to suit your preferences if necessary!


How quickly does a chainsaw turn?

The measurement should range from 10,000 to 14,000 rpm, depending on the saw you are using. That’s a significant range, so before performing this test, it’s crucial to research the saw’s top speed. The engine should never be used at a speed greater than the highest speed for which it is intended.

What is the Idle speed of RPM?

A typical idle speed for most modern vehicles is between 600 and 1000 RPMs. It won’t seem smooth, though, if your automobile is idling poorly. For instance, the RPMs will fluctuate or drop below 600 RPM (or whatever your vehicle’s regular RPM range is).

How is the RPM gauged?

A mechanical tachometer in the dynamometer and an electronic tachometer in the display rack are both used to measure the engine RPM independently. These instruments monitor how quickly the engine crankshaft rotates.

Which chainsaw spins at the most speed?

The MS 400 C-M chainsaw has STIHL’s best performance and highest max rpm (14,000 rpm) in the 60cc chainsaw category and was created with professional forestry and arb users in mind. 

What is the chainsaw’s speed?

Consult the chainsaw’s handbook to learn more about the real chain speed. You will find 2 chain speeds in the instructions. One that is the nominal speed + 33% and complies with the EN ISO 11681 standard, which outlines the specifications for portable chainsaws. The actual rated speed is the other.

Similar Posts